EMON II false amp reading

For the Energy Monitor, ESP, and other monitors

EMON II false amp reading

Postby JNeed on Wed Sep 03, 2014 3:18 pm

I’m working on an EMON II for a customer. The amp draw reads minus 5a even when there is no load as confirmed with a clip-on Fluke meter. I shorted the shunt sensing leads together and got a correct 0.0 display
I cleaned the negative cable grounds at the shunt and it worked perfectly for 4 days…0 to .1 amps displayed at no load.
Then on day five, right back to -5 amps (no load).
More bad connections or is a repair called for?

Thanks, John Needham
Coecles Harbor Marina
Shelter Island, NY
JNeed
 
Posts: 1
Joined: Wed Sep 03, 2014 2:57 pm
Location: Shelter Island, NY

Re: EMON II false amp reading

Postby Coulomb on Tue Sep 09, 2014 2:32 pm

We can no longer do repairs on this product. Parts are not obtainable in many cases.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm


Return to Ample Power Monitors

Who is online

Users browsing this forum: No registered users and 1 guest

cron