Page 1 of 1

Regulator M/N 1111

PostPosted: Wed Aug 12, 2009 4:37 pm
by mykirby1012
I need info re: M/N 1111-3 step deep cycle voltage regulator.
The application is on a 1989 Prevost chassis that was converted to a motorhome by (apparently defunct) "Linden" coach.
Linden (I guess) added your regulator to control a 24 volt alternator mounted to a 17 KW Martin diesel generator.
It's job is to control the charge to the "house" batteries.
Hopefully, you still have info on this in some dusty file cabinet somewhere.
What I need to know is, is it designed for a 24 volt alternator and, if so, how is it supposed to be wired?
It's S/N is something like....1111-312. It has no voltage info but, does say 12 amp.
It has 2 sets of wiring connectors. Bottom right set is apparently for the battery, alternator and ground. The lower center one is unknown but, has wiring on it....perhaps meters?
I don't have access to it right now but, could send a picture of it tomorrow.
Hope you can assist.
Thanks,
Irby

Re: Regulator M/N 1111

PostPosted: Wed Aug 12, 2009 5:48 pm
by Coulomb
Send a picture, your description of the terminal blocks doesn't compute.

Re: Regulator M/N 1111

PostPosted: Thu Aug 13, 2009 5:42 am
by mykirby1012
Attached are the pics of the regulator you asked for.
Irby

Re: Regulator M/N 1111

PostPosted: Fri Aug 14, 2009 2:31 pm
by ruth
This manual is available for $25.00 plus shipping and handling. Call us Monday at 206.789.0827. Thanks.