Bench Test

For all issues involving the Smart Alternator Regulators, V1, V2 and V3

Bench Test

Postby BenS on Tue Jun 19, 2012 6:10 am

Hello - I have a SAR V3 Model 9B-12PREG-D, SN K06160005. The processor is labeled "Ver 2.6".

Before I install it on my boat, I'd like to put it on the bench and verify it's working. I am an electrical engineer with access to decent equipment and know how to trouble shoot.

Can you provide some info? "Connect 12 VDC here, GND here, and watch the (RYG) led blink like this..."

I figure if it wakes up, it's probably OK.

Posts: 2
Joined: Sat Jun 16, 2012 3:35 pm

Re: Bench Test

Postby Coulomb on Tue Jun 26, 2012 2:29 pm

Hook up the power and ground as shown on the wiring diagram in the manual.
Site Admin
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Return to Smart Alternator Regulators

Who is online

Users browsing this forum: No registered users and 1 guest