DIP switch settings for Sonnenschein batteries

For all issues involving the Smart Alternator Regulators, V1, V2 and V3

DIP switch settings for Sonnenschein batteries

Postby MarkA on Tue Mar 19, 2013 4:53 am

I have a Smart Regulator V3 and I would like to know what DIP switch setting to use on a bank of Sonnenschein DryFit Solar Block A200 gel batteries (four 6V 200 Ah solar block cells, wired in series and parallel to give 12V 400 Ah).

The manufacturer recommends 2.4V per cell charging voltage at 20 Celsius for cyclic operation and 2.3V per cell charging voltage at 20 Celsius for float operation. Operating temperature is around 25-30 degrees

Here is a link to the data sheet for these batteries: http://www.exide.com/Media/files/Downloads/IndustEuro/Sonnenschein%20A200.pdf

Any help appreciated.
MarkA
 
Posts: 1
Joined: Mon Mar 18, 2013 3:57 pm

Re: DIP switch settings for Sonnenschein batteries

Postby Coulomb on Wed Mar 20, 2013 4:58 pm

Use the Ample Power Gel setting.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm


Return to Smart Alternator Regulators

Who is online

Users browsing this forum: No registered users and 5 guests

cron