Page 1 of 1

DIP switch settings for Sonnenschein batteries

PostPosted: Tue Mar 19, 2013 4:53 am
by MarkA
I have a Smart Regulator V3 and I would like to know what DIP switch setting to use on a bank of Sonnenschein DryFit Solar Block A200 gel batteries (four 6V 200 Ah solar block cells, wired in series and parallel to give 12V 400 Ah).

The manufacturer recommends 2.4V per cell charging voltage at 20 Celsius for cyclic operation and 2.3V per cell charging voltage at 20 Celsius for float operation. Operating temperature is around 25-30 degrees

Here is a link to the data sheet for these batteries: http://www.exide.com/Media/files/Downloads/IndustEuro/Sonnenschein%20A200.pdf

Any help appreciated.

Re: DIP switch settings for Sonnenschein batteries

PostPosted: Wed Mar 20, 2013 4:58 pm
by Coulomb
Use the Ample Power Gel setting.