Page 1 of 1

#1018 Sensor Testing

PostPosted: Tue May 24, 2016 3:12 pm
by spencerhig
Does anyone know how to test a suspect #1018 Sensor? I am repairing a 3-step #1021A regulator and wish to know if the sensor is OK before reconnecting.

Re: #1018 Sensor Testing

PostPosted: Tue May 24, 2016 3:32 pm
by Coulomb
Using a 10 to 15K resistor in series, connect the series pair across 12V with the red going toward positive. There should be about 2.5 Volts across the sensor.