Next Step Regulator voltage settings

For Next Step Regulators including Lifeline units. Use the NS2 forum for NS2 issues.

Next Step Regulator voltage settings

Postby Matt on Tue Nov 17, 2009 6:03 pm

According to the info from Ample Power my Next Step Regulator factory settings are 14.4 volts for the Absorption charge. Float charge is 0.8 volts less or 13.6 volts.
What voltage should I be reading at Bulk Charge?
When the time is adjusted for the Absorption charge does it effect the time for the Bulk charge?
Regards, Matt
Matt
 
Posts: 1
Joined: Tue Nov 17, 2009 4:35 pm

Re: Next Step Regulator voltage settings

Postby Coulomb on Wed Nov 18, 2009 11:31 am

Read this from the Primer.
http://www.amplepower.com/primer/full/index.html
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm


Return to Next Step Regulators

Who is online

Users browsing this forum: No registered users and 2 guests

cron