Page 1 of 1

Next Step Regulator voltage settings

PostPosted: Tue Nov 17, 2009 6:03 pm
by Matt
According to the info from Ample Power my Next Step Regulator factory settings are 14.4 volts for the Absorption charge. Float charge is 0.8 volts less or 13.6 volts.
What voltage should I be reading at Bulk Charge?
When the time is adjusted for the Absorption charge does it effect the time for the Bulk charge?
Regards, Matt

Re: Next Step Regulator voltage settings

PostPosted: Wed Nov 18, 2009 11:31 am
by Coulomb
Read this from the Primer.
http://www.amplepower.com/primer/full/index.html