SAR V3-12P

For Next Step Regulators including Lifeline units. Use the NS2 forum for NS2 issues.

SAR V3-12P

Postby AlanD on Wed Jan 15, 2014 8:21 am

As you have not fully answered my post of 15th December, here it is again:
I have a SAR V3-12P charging a bank of Trojan T105 batteries. Trojan recommend these are charged at 14.5 volts at 30 degrees centigrade (temperature corrected). The SAR is only putting out 14.2. Can this be adjusted? The battery type selector switch S1 is set to thick plate liquid.
AlanD
 
Posts: 4
Joined: Fri Nov 15, 2013 11:18 am

Re: SAR V3-12P

Postby Coulomb on Thu Jan 16, 2014 10:11 pm

Without a temp. sensor connected to the regulator, you should see about 14.4 Volts.

You can add series resistance in the B1V Sense lead. It affects the output voltage about 1/2 Volts per 1000 Ohms.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Re: SAR V3-12P

Postby AlanD on Fri Jan 17, 2014 11:15 am

Thank you.
AlanD
 
Posts: 4
Joined: Fri Nov 15, 2013 11:18 am


Return to Next Step Regulators

Who is online

Users browsing this forum: No registered users and 1 guest

cron