NS2

For issues involving the NS2 regulator.

NS2

Postby JSally on Tue Mar 11, 2014 4:24 pm

Good morning
We have just installed our new NS2.
When it was connected the green light was 3on/3off and the red light was 6on/3off.
When I ran the engine the red light went away, the green showed 3on/3off, and the orange light was on [ we do not have it wired for battery Combiner option].
Now with engine off we have the orange on and the green 3on/3off. Is this normal?

Your prompt reply to this would be appreciated as we have to leave here and will not have internet.

Thanks SA
PS the voltage with ending on was correct for absorption as I set it.
JSally
 
Posts: 14
Joined: Mon Feb 24, 2014 9:43 pm

Re: NS2

Postby Coulomb on Tue Mar 11, 2014 4:59 pm

With the engine running, the 3/3 green led should be different depending on the charge state. But it appears to be charging OK.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Re: NS2

Postby JSally on Tue Mar 11, 2014 7:51 pm

Is it normal that the orange light is showing and also the green when the engine is not running? This is different to the Next Step regulator we have replaced.
JSally
 
Posts: 14
Joined: Mon Feb 24, 2014 9:43 pm

Re: NS2

Postby Coulomb on Wed Mar 12, 2014 5:31 pm

Yes, the NS2 stays partially alive to operate a solenoid whenever something is charging the house bank.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Re: NS2

Postby JSally on Thu Mar 13, 2014 4:56 pm

Many thanks
JSally
 
Posts: 14
Joined: Mon Feb 24, 2014 9:43 pm


Return to NS2 Regulators

Who is online

Users browsing this forum: No registered users and 1 guest

cron