For all issue regarding Ample Power Alternators.


Postby MGS on Wed Apr 01, 2015 11:00 am

4023 alt with balmar 614 reg and 4 size 31 agm bats. At 85 percent charge, voltage rises slowly to 13.4 with current 45 amps, then reduces voltage and amps to 12.6 and 6 amps. Balmar reg calls for 14.3 volts but never reaches more than 12.6. Have changed all bat cables pos and neg, tried new balmar 614' and had 4023 checked at shop. Could this be bad bats?
Posts: 1
Joined: Tue Mar 31, 2015 4:47 pm

Re: charging

Postby Coulomb on Wed Apr 01, 2015 1:06 pm

Check and clean all connections in the battery sense lines.
Site Admin
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Return to Ample Alternators

Who is online

Users browsing this forum: No registered users and 1 guest