Page 1 of 1

charging

PostPosted: Wed Apr 01, 2015 11:00 am
by MGS
4023 alt with balmar 614 reg and 4 size 31 agm bats. At 85 percent charge, voltage rises slowly to 13.4 with current 45 amps, then reduces voltage and amps to 12.6 and 6 amps. Balmar reg calls for 14.3 volts but never reaches more than 12.6. Have changed all bat cables pos and neg, tried new balmar 614' and had 4023 checked at shop. Could this be bad bats?

Re: charging

PostPosted: Wed Apr 01, 2015 1:06 pm
by Coulomb
Check and clean all connections in the battery sense lines.