Page 1 of 1


PostPosted: Thu Aug 20, 2009 11:31 am
by Jimmy
I have just installed 2 new regulators the charge my 8-d starting battries. i have an inverted to charge my house battries. i do not have the parallel post connected on either regulator. My question is why is the yellow parallel light glowing 100% 0f the time. I cannot find anything in the documentation that explains this condition. the red and green lights are fine.

Re: SARV-3-12v

PostPosted: Thu Aug 20, 2009 3:56 pm
by Coulomb
The orange LED indicates that the parallel output is asserted.

From the manual: "PARALLEL, (optional) output that has a positive voltage when the regulator detects that the house battery is being charged. The maximum load is 1.5 Amps. "