DBC 280-12 operating temp and thermostat

For issue regarding Ample Power diesel/bio-diesel battery chargers.

DBC 280-12 operating temp and thermostat

Postby Kristen on Mon Apr 04, 2011 12:59 pm

What are the normal parameters of the operating temp in this model, and what temperature thermostat is in the engine? So far it has run at about 140 degrees. Thanks.
Posts: 7
Joined: Mon Apr 04, 2011 11:21 am

Re: DBC 280-12 operating temp and thermostat

Postby Coulomb on Mon Apr 04, 2011 2:46 pm

The thermostat is set a 190.

The problem with gauge panels is twofold. 1) allow for 20% inaccuracies; 2) the temperature sender is mounted adjacent to the thermostat, but not in direct coolant flow, so it will always read low, even when the fitting is insulated from atmosphere. It takes a long time for the sender to come up to temperature.

The gauge is an indicator that's useful to show when things are not normal. Run the unit for 45-60 minutes under full load and make a note of the gauge reading. If you have an infrared thermometer you can correlate the two readings.
Site Admin
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Return to Ample Power Diesel Battery Chargers

Who is online

Users browsing this forum: No registered users and 1 guest