eratic temperature reading on EMON 2H1A moniter

For the Energy Monitor, ESP, and other monitors

eratic temperature reading on EMON 2H1A moniter

Postby schorn on Fri Jun 14, 2013 1:15 pm

Without any changes made to battery system the temperature on the monitor fluctuated between 15 degrees F to 80 Degrees F. I replaced the 2018 probe going to the battery and checked the voltage on TB1 #6 & #9 and it read 3.02 volts, which is in spec. (temperature was about 82 degrees F).
What else could be causing the fluctuation?
schorn
 
Posts: 1
Joined: Thu Jun 13, 2013 3:35 pm

Re: eratic temperature reading on EMON 2H1A moniter

Postby Coulomb on Fri Jun 14, 2013 2:52 pm

Disconnect power from the unit for a few seconds and see if that cures the problem.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm


Return to Ample Power Monitors

Who is online

Users browsing this forum: No registered users and 0 guests

cron