SARV3 batt volt sense location

For Next Step Regulators including Lifeline units. Use the NS2 forum for NS2 issues.

SARV3 batt volt sense location

Postby atmarineserv on Tue Dec 01, 2009 3:09 pm

Hi Coulomb,
just verifying the location of the volt sense and temp sense on the house bank. This is a 3 battery house bank, AGM, in paralell, 315AH, 12V. I am going to install the temp sensor, on the battery that is connected to the hot buss / positive distrubution, and then then the battery V sense to the battery "farthest" from the battery that is connected to the hot buss. Sound Good? Thanks,Zach
atmarineserv
 
Posts: 6
Joined: Sat Oct 17, 2009 5:51 pm

Re: SARV3 batt volt sense location

Postby atmarineserv on Tue Dec 01, 2009 3:37 pm

Should be under SAR,sorry!
atmarineserv
 
Posts: 6
Joined: Sat Oct 17, 2009 5:51 pm

Re: SARV3 batt volt sense location

Postby Coulomb on Tue Dec 01, 2009 3:42 pm

If the batteries are wired in parallel correctly, then the location isn't too critical. If not, put the sensor on the positive post closest to the positive distribution point.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm


Return to Next Step Regulators

Who is online

Users browsing this forum: No registered users and 1 guest

cron