Run controller

For issue regarding Ample Power diesel/bio-diesel battery chargers.

Run controller

Postby Katmai on Sun Sep 26, 2010 7:35 pm

I'm in the process of installing a Genie 12V-150 on my boat. We and our boat are currently in Perth, Australia.
I'm looking at the Genie controller and am wondering if there is not someway for Ample Power to make this unit live up to the same quality as the rest of the Genie equipment? It seems to me that this controller is very exposed in a marine environment, in both the physical as the environmental sense. Do you have any thoughts on that? How about placing the whole unit in a good case with similar connector system as on the SAR v3 and making the red LED so that it can be mounted remotely, again similar to the remote warning light options on the SAR v3. The controller I received is an open circuit board with a clear plastic shield on top, no sides and a very cheap platic piece that barely clips on to the back.

If you already have done some of that would you please let me know, so that I could consider upgrading before I attempt to install this unit? If you have not then please advice as to your suggestion and expectations in mounting this controler efrectively with the expectation of longevity. In my humble view things like this do not survive long in a cruising marine environment.

Kindest Regards

Eric Paerels
s/v Katmai
Perth, Australia
Katmai
 
Posts: 24
Joined: Tue Sep 21, 2010 1:54 am

Re: Run controller

Postby Coulomb on Mon Sep 27, 2010 10:58 am

The Genie controller, like Genies themselves, are a low volume production item. The packaging you suggest would be great, however, to make it affordable would require making several hundred units at a time - as is done on the regulators.

However, there has been some discussion about redesigning the controller, if, (when), the economy raises the sale of products.

Thanks for the feedback.
Coulomb
Site Admin
 
Posts: 1174
Joined: Sat Jun 06, 2009 5:11 pm

Re: Run controller

Postby Katmai on Wed Sep 29, 2010 6:09 pm

Thanks for the reply. A thought for you - my impression would be that most who buy a nearly 10,000$ generator (all up) would rather spend a couple hundred more to get a really top product. My sense is that manufacturing the controller to a matching quality of the Genie, even on a one-off and some additional cost, would be welcomed by most of your customers. Maybe you could provide a version of the controller in an good quality free standing case as an additional price option?
Thanks for a really top notch diesel 12v generator, I am exited to finally turn the start key in a few more weekends of installation work.
Kind Regards
Katmai
 
Posts: 24
Joined: Tue Sep 21, 2010 1:54 am


Return to Ample Power Diesel Battery Chargers

Who is online

Users browsing this forum: No registered users and 0 guests

cron